Flow-Through Pulsation Dampeners for Hose Pumps - Bladder Type

A flow through bladder type pulsation dampener that is smooth as a turbine and in place flush able. PipeHugger low pressure is an economical flow through pulsation dampener with liquid in the bag, and pre-charge gas in the shell. PipeHugger has a shorter in to out dimension than PumpGuard, with higher performance. You can save a “T” piece, and have 3 times the performance. The piping base is welded in the system maintaining pipe integrity. PipeHugger is a quick release four bolt pulsation dampener for easy maintenance. PipeHugger low pressure is chosen where you want an elastomer compatibility, plus in place flush through. Flow through is standard, a single connection is special, if you do not wish to use flow through, you can save a "T" for your RV or drain by using the second connection.

Hose Pumps & High Pressure PipeHugger PHr Pulsation Dampeners

Flow through pulsation dampener as smooth as a turbine & in place flush able: High pressure PipeHugger PHr, liquid in the bladder type pulsation dampener. HP PipeHugger PHr - Pressure pulse damping & flow fluctuation removal for the CPI. 8:1 diameter ratio pipe: shell ensure damping. Large diameter shells at low cost - liquid is in bladder minimizing use of high cost metals.

See Also: PumpGuard Pulsation Dampener - PuG - (BELOW). With uninterrupted "clear flow", flex tube from end to end, designed for suction, sludge, slurry, easily flush able and even rod able. Available with food industry trim and with flow tube from FDA approved elastomer ingredients.

Sludge, Slurry, Hose, Peristaltic Pump Dampener Information: Pulsation Dampener / Pulsation Dampener Drawings / Pulsation Dampener Safety
See Also @ PulseDampeners.com: Centrifugal Pump Pulsation Dampeners and Gear Pump Pulsation Dampeners

Hose Pumps Pulsation Dampeners / Flow Through / Sludge and Slurry | Pump Surge Dampners | Contact PulseDampeners